Mobile Lectern Tutorial

Starting the System

• Using the wall panel, press the On button to turn on the system and the Down button to lower the projection screen
• Wait 30 seconds before pressing any other buttons (projector will count down as it warms up)
• Please remember to turn off the system when you are done by pressing Off on the wall panel

To use the lectern computer

• Using the wall panel, press the Computer 1 button located under the projector sources section
• Press button 1 on the Extron panel located on the front of the podium
• Remember to log off the computer and turn off the system when you leave

To use the lectern VCR

• Using the wall panel, press the VCR button located under the projector sources section
• Remember to turn off the system when you leave

To use a laptop

• Connect your laptop to the laptop cable that is sitting on the top of the lectern. This cable has a trapezoid VGA connector with 15 pins
• Connect the audio connector of this cable, if available, to the audio output or headphone jack on your laptop
• Using the wall panel, press the Computer 1 button located under the projector sources section
• Press button 2 on the Extron plate located on the front of the podium to display the laptop source on the projector
• Internet access is available via the Ethernet port above the keyboard
• If you have problems, make sure the VGA output of the laptop is enabled, or contact OIT as shown below
• Remember to turn off the system when you leave

To use your own S-video device

• If you have any equipment that uses an S-video output (i.e. Laserdisc) you can use it here. You must bring your own cables
• Using the wall panel, press the S-Video button located under the projector sources section
• Remember to turn off the system when you leave

To use your own composite-video device

• If you have any equipment that uses a composite-video output (i.e. Laserdisc) you can use it here. You must bring your own cables
• Using the wall panel, press the Video button located under the projector sources section
• Remember to turn off the system when you leave

Adjustments

• The volume can be adjusted via the wall panel, using the Up or Down buttons located under the Volume section
• Pressing the Preset button will automatically set the volume to a comfortable average level
• The Mute button will completely silence the system, or it will allow sound again if the system is already muted

System Details

• Media Support: DVD (via PC), VCR, ZIP, USB, headphones
  • Two USB ports and a headphone jack: on front of the computer (under flip panel)
  • USB port: on front of the lectern above the keyboard
  • S-Video and composite inputs: on floor wall plate
• Laptop Support: VGA, audio, ethernet, USB
  • Laptop cable: attached to the front of the lectern
  • Ethernet and USB ports: on front of the lectern above the keyboard

Classroom Technology Support Assistance is available M-F from 7am to 8pm. Problems can be reported 24 hours a day by calling 404.894.4669.